On the front of the printer itself, turn off the Paper Size check. Printer port setting does not match the printer connection port (for Windows only) Follow the steps below to select the printer port. DO YOU ACCEPT THIS?
If necessary, remove any jammed paper. Proper loading depends on the leading edge being perfectly even, so that it goes straight into the rollers. Other maintenance cartridges will not work and may cause damage not covered by your warranty. For Windows, see Cleaning the print head.
PRESS THE UP BUTTON Something may be placed on the printer (ink cover). Horizontal banding Vertical misalignment or banding Color documents print in black ink only Faint printout or gaps Blurry or smeared printout Horizontal banding Try one or more of these solutions: See Replacing Ink Cartridges.
Logged Eric Myrvaagnes Sr. DO YOU ACCEPT THIS?
Logged na goodman Sr. Epson Stylus Pro 3800 Ink If this message appears after reinstalling the ink cartridge, replace it. Member Offline Posts: 392 Re: Epson 3800 paper feed error « Reply #4 on: December 02, 2011, 08:23:49 AM » What tray are you using to feed the paper? https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=79928&infoType=FAQs I tried to open 10/9/2016 10/9/2016 Viet - Printer Tech HP1102w sometimes gives me the "couldn't open fifo (2)" 10/9/2016 10/9/2016 Shefin Wondering if my Lexmark X4530 will work with my
See "Replacing the Maintenance Cartridge" on page 15. Epson Stylus Pro 3800 Manual For Windows, select the Borderless checkbox on the Paper tab. See "Aligning the Print Head" on page 13. I have had issues off and on with paper feed, but not like this.
Remove the thick paper. http://www.justanswer.com/printers/4apkl-epson-stylus-pro-3800-will-no-longer-load-paper.html FRONT FEED SLOT OPEN CLOSE THE FRONT MANUAL FEED SLOT The front manual feed slot is opened during operation. Epson Stylus Pro 3800 Ebay CARRIAGE LOCKED RELEASE THE CARRIAGE LOCK Print head is locked. Epson Stylus Pro 3800 Maintenance Cartridge Replace the ink cartridge with a genuine Epson ink cartridge.
Stop printing, and press the cancel button for 3 seconds. this website I've only used Epson printers, but those tips may also apply to other brands of inkjet printers. Load the paper that has just been ejected, and then press the button. If the leading edge is damaged, try turning the paper around and loading the edge on the opposite side instead. Epson Stylus Pro 3800 Driver Mac
Connect the printer to a USB 2.0 port. For Mac OS X, see Cleaning the print head. Replace the maintenance cartridge with a new one. http://deepfrom.com/epson-stylus/epson-stylus-cx9400fax-paper-jam-error.html See Replacing Ink Cartridges.
INK CARTRIDGE ERROR PRESS THE UP BUTTON REPLACE THE CARTRIDGE An ink cartridge has been installed incorrectly. Epson Stylus Pro 3800 Troubleshooting Make sure the supplied voltage to the printer matches the rating voltage labeled on the printer. Please try the request again.
Top The printer does not turn on or stay on When the Power light does not come on and mechanism initialization does not start even when the Power button is pressed FRONT FEED SLOT OPEN PRESS THE DOWN BUTTON AND REMOVE PAPER There was a problem loading paper in the front manual feed slot. Remove the protective materials from the print head to unlock it. Epson Stylus Pro 3800 Maintenance Cartridge Full See Replacing the Maintenance Cartridge.
See . Make sure your paper is dry and the printable side is loaded face-up. I read the book and tried different settings and even downloaded the epson drive , I use KODAK ultra Premium High Gloss for printing. See Page Setup.
Logged David Good Photographyhttp://dgoodphoto.smugmug.com/http://www.studioberube.ca/ Print Pages:  Go Up Luminous Landscape Forum > Raw & Post Processing, Printing > Printing: Printers, Papers and Inks > Epson 3800 paper feed error Error messages Message Description What to do MAINTENANCE CARTRIDGE IS NEARLY FULL The maintenance cartridge is almost full.